Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            AEMC 1800: (1 year) CAL VER /5520
DATE:                  26-Aug-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.1 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       17
NUMBER OF LINES:       125
CONFIGURATION:         Fluke 5520A
=============================================================================
#
# Compatibility:
#   5500/CAL 5.0 or MET/CAL 5.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5520A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  DISP         {Procedure not formally tested with UUT.}
  1.001  DISP         {See procedure README file.}
  1.002  ASK-                        P                            F        V
  1.003  ASK+           K                              X
  1.004  HEAD         PRELIMINARY INSTRUCTIONS
  1.005  DISP         Connect UUT to 8vdc Power and turn unit ON.
  1.005  DISP
  1.005  DISP         Warm-up time: 2min
  1.005  DISP         Temperature : 23 +/-2 degC
  1.005  DISP         Humidity    : 55 +/-10%
  1.006  DISP         [32]                WARNING
  1.006  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.006  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.006  DISP         personnel fail to observe safety precautions.
  1.007  HEAD         {DECIMAL POINT DISPLAYING}
  1.008  HEAD         DECIMAL POINT DISPLAYING: {0.5A RANGE}
  1.009  RSLT         =Three-phase (display 00.0)
  1.010  DISP         Set S1 to 0.5A.
  1.010  DISP         Set S2 to Three-phase.
  1.011  EVAL   Is the display 00.0?
  2.001  RSLT         =Single-phase x 1 (display 00.0)
  2.002  DISP         Set S2 to Single-phase x 1.
  2.003  EVAL   Is the display 00.0?
  3.001  RSLT         =Expanded low power (display 00.0)
  3.002  DISP         Set S2 to Expanded low power.
  3.003  EVAL   Is the display 00.0?
  4.001  HEAD         DECIMAL POINT DISPLAYING: {5A RANGE}
  4.002  RSLT         =Three-phase (display 000)
  4.003  DISP         Set S1 to 5A.
  4.003  DISP         Set S2 to Three-phase.
  4.004  EVAL   Is the display 000?
  5.001  RSLT         =Single-phase x 1 (display 000)
  5.002  DISP         Set S2 to Single-phase x 1.
  5.003  EVAL   Is the display 000?
  6.001  RSLT         =Expanded low power (display 00.0)
  6.002  DISP         Set S2 to Expanded low power.
  6.003  EVAL   Is the display 00.0?
  7.001  HEAD         DECIMAL POINT DISPLAYING: {50A RANGE}
  7.002  RSLT         =Three-phase (display 0.00)
  7.003  DISP         Set S1 to 50A.
  7.003  DISP         Set S2 to Three-phase.
  7.004  EVAL   Is the display 0.00?
  8.001  RSLT         =Single-phase x 1(display 0.00)
  8.002  DISP         Set S2 to Single-phase x 1.
  8.003  EVAL   Is the display 0.00?
  9.001  RSLT         =Expanded low power (display .000)
  9.002  DISP         Set S2 to Expanded low power.
  9.003  EVAL   Is the display .000?
 10.001  HEAD         DECIMAL POINT DISPLAYING: {500A RANGE}
 10.002  RSLT         =Three-phase (display 0.00)
 10.003  DISP         Set S1 to 500A.
 10.003  DISP         set S2 to Three-phase.
 10.004  EVAL   Is the display 00.0?
 11.001  RSLT         =Single-phase x 1 (display 0.00)
 11.002  DISP         Set S2 to Single-phase x 1.
 11.003  EVAL   Is the display 00.0?
 12.001  RSLT         =Expanded low power (display 0.00)
 12.002  DISP         Set S2 to Expanded low power.
 12.003  EVAL   Is the display 0.00?
 13.001  HEAD         {POWER MEASUREMENT ACCURACY}
 13.002  HEAD         POWER MEASUREMENT ACCURACY: {0.5A RANGE}
 13.003  DISP         Connect the 5520A to the UUT as follows:
 13.003  DISP         [32] 5520A NORMAL HI to UUT V1 Voltage Input
 13.003  DISP         [32] 5520A NORMAL LO to UUT N Voltage Input
 13.003  DISP         [32] 5520A AUX HI to UUT C1 Current Input
 13.003  DISP         [32] 5520A AUX LO to UUT N Current Input
 13.004  DISP         Set S1 to 0.5A.
 13.004  DISP         Set S2 to Single-phase.
 13.005  M5520        240V                                        SI
 13.006  5520         0.5A                         60H            SI    S  2W
 13.007  ACC          120.0W         0.1026U
 13.008  MEMI         Enter UUT reading in Watts.
 13.009  MEME
 13.010  MEMC   120   W              0.3/
 14.001  M5520        240V                                        SI
 14.002  5520         0.5A                         400H           SI    S  2W
 14.003  ACC          120.0W         0.1026U
 14.004  MEMI         Enter UUT reading in Watts.
 14.005  MEME
 14.006  MEMC   120   W              0.3/
 15.001  M5520        240V           -90deg                       SI
 15.002  5520         0.5A                         60H            SI    S  2W
 15.003  ACC          0W             0.3304U
 15.004  MEMI         Enter UUT reading in Watts.
 15.005  MEME
 15.006  MEMC   1200  W              0.3/          -90deg
 16.001  HEAD         POWER MEASUREMENT ACCURACY: {5A RANGE}
 16.002  DISP         Move the connection from the 5520A AUX HI to 5520A 20A.
 16.003  DISP         Set S1 to 5A.
 16.004  M5520        240V                                        SI
 16.005  5520         5A                           60H            SI HC S  2W
 16.006  ACC          1200.0W        0.1027U
 16.007  MEMI         Enter UUT reading in Watts.
 16.008  MEME
 16.009  MEMC   1200  W              0.3/
 17.001  END